Connecting to a device
How do I add a device?
- On the device list, choose Add device. With no devices yet, the button is Add a device.
- Choose Search the network, or enter the address yourself. Searching looks for devices on your Wi-Fi network, and nothing about the search is sent to us. On iPhone and iPad, iOS asks for local network access the first time. If you decline, enter the address instead.
- To enter it, type the address you would open in a browser, for example
192.168.2.108orkvm.local. Leave Device type on Detect automatically, then choose Check address. Remote KVM reads the model from the device. - Sign in with the user name and password of the device. The password is kept in secure storage on your phone or tablet.
- If the device uses HTTPS and Remote KVM has not seen its certificate, it asks you to trust it. See Certificates below.
Free keeps 1 saved device. A second one opens the Pro screen. You can try everything first with the Demo device, which needs no hardware.
The address is not found, or the device does not answer
Open the device, then Edit device and Run diagnostics. It checks the address, connection, certificate, sign-in, video and response time one at a time, and says which step failed.
- The phone or tablet must be on the same network as the device, or Tailscale must be on.
- "The device refused the connection": the device is on, but nothing listens on that port. Check the port in the device settings.
- "The device did not answer": it may be off, or on another network.
Connected, but there is no picture
The device signed in but the computer sends no signal. It may be off, asleep or not sending video. Check that the computer is on. The power sheet still works with no picture: Power, Reset, Wake and Restart video.
Sign-in does not work
"The password was not accepted." Check the user name and password in Edit device. Remote KVM never retries a login on its own, so a wrong password does not lock the device. If the device asks for a two-factor code, Remote KVM asks for it each time it connects and never saves it.
What does "Not encrypted" mean?
The device is reached over plain HTTP. The app allows that only on a private network or over Tailscale, and shows Not encrypted. For a public address, use HTTPS. The JetKVM video stream stays encrypted even then; the sign-in and setup do not.
Certificates and "Trust certificate"
What is the "Trust this certificate?" screen?
A KVM device proves who it is with a certificate. Most of them make their own, so no store vouches for it. The first time you connect, Remote KVM shows the SHA-256 fingerprint of the certificate.
- Open the device's own page or its settings and find its certificate fingerprint.
- If it matches the one in the app, choose Trust certificate. Remote KVM remembers it and checks it on every connection.
- Trust once connects this time and asks again next time.
If you cannot compare the fingerprints, the usual safe case is a device on your own network that you set up yourself.
"The certificate has changed"
Remote KVM blocks the connection when the certificate differs from the one you trusted. This can happen after a firmware update, a factory reset, or when you install your own certificate or get one from Let's Encrypt. If you did not expect it, check with whoever manages the device before you go on. The screen shows what you trusted before and the new certificate. Choose Trust new certificate to accept it, and Remote KVM pins the new one.
Does the app check certificates for plain HTTP devices?
No. A device on plain HTTP has no certificate to check. See "Not encrypted" above.
Using Tailscale
Remote KVM does not run a relay and has no cloud. To reach a device away from home, put the device and your phone or tablet on the same Tailscale network.
- Install Tailscale on the phone or tablet, and make the KVM device reachable on your Tailscale network: either the device itself, or a computer on its network that advertises the route. Your device's own guide says which it supports.
- Turn Tailscale on, on the phone or tablet.
- In Remote KVM, add the device with its Tailscale address: the
100.x.x.xaddress, or its.ts.netname.
Remote KVM allows plain HTTP for Tailscale addresses (100.64.0.0/10 and .ts.net names), because Tailscale encrypts the link itself. Devices found this way show via Tailscale. If the device does not answer, check that Tailscale is on, then run diagnostics: "There is no route to the device" means the phone or tablet cannot reach it on the network.
JetKVM allows one session at a time
A JetKVM signs out its previous client each time a new one signs in. That is how the device works, not a fault of the app.
- Signing in with Remote KVM signs out the JetKVM web page, and the reverse. The sign-in screen says so.
- If another client is using the device, Remote KVM shows In use elsewhere: "Another client is using this device. Take over to end its session here." Choose Take over to end the other session and start yours.
- If another client takes over while you are connected, the session ends with "Another client took over this device." Remote KVM never reconnects on its own, so it does not take the device back. Start the session again from the device list.
What "Beta" means
A Beta badge appears wherever a Beta device appears. It means: this device is checked against its protocol and test traces, not yet on our own hardware. Some features may change.
- Tested: we check the device on our own hardware. Today that is the JetKVM Mini.
- Beta: the original JetKVM, PiKVM (including BliKVM on PiKVM OS), GL.iNet Comet, NanoKVM, TinyPilot and ESP-KVM. A JetKVM Mini flashed with ESP-KVM firmware is an ESP-KVM, so it is Beta.
- Beta devices are usable, but we cannot promise every feature on every firmware, and we promise no fix dates.
A trace helps most (see How to send a trace). Tell us the device, the firmware version and what worked.
What Pro costs
Is there a subscription?
No. Pro is one payment. There is no subscription, no renewal and no trial. The store shows the price for your country before you buy. Free keeps 1 saved device with every basic, including power and Wake-on-LAN.
How do I get Pro back on a new phone?
Open Settings, then Pro unlock, then Restore purchases. You need the same Apple or Google account that bought it. On Apple devices, Family Sharing lets the people in your family group use Pro too.
Refunds
Payment, receipts and refunds are handled by Apple or Google under their terms. Ask the store for a refund.
How to send a trace
A trace is a text file listing what your phone and the device said to each other during the diagnostics steps. It helps us fix devices we cannot test ourselves.
- On the device list, open the device's Edit device screen. A long press on the card opens it.
- Under Troubleshooting, choose Run diagnostics and wait for every step to finish.
- Choose Export trace. The screen lists what is removed and what is kept.
- Choose Share trace, then pick Mail or another app and send it to support@rsclabs.net.
Removed from the file: passwords, tokens, cookies, user names, IP addresses, and the address and name of the device. Kept: the model, the firmware version, the certificate fingerprint and how each step went. A trace leaves your phone only when you share it. Add a line about what you were doing and what went wrong.
Contact
Write to support@rsclabs.net with the device, its firmware version, the app version and what you were doing. For anything else, see Company.
Remote KVM is an independent app. It is not affiliated with or endorsed by JetKVM, PiKVM, GL.iNet, Sipeed, TinyPilot, the ESP-KVM project or Tailscale. Product names are trademarks of their owners.